Overview: MicroSub+(plus)™

Taking our high-performance, slot-ported enclosure designs to an all-new level.

Utilizing our exclusive our exclusive DCD™ amplifier technology with specially engineered, ultra low-impedance W3v3 and TW1 drivers, our legendary MicroSub™ enclosures get a big shot of power that's built right in. MicroSub+™ systems are capable of delivering astonishing output and low frequency extension with exceptional efficiency. All MicroSub+™ enclosures and subwoofer drivers are built to exacting quality standards in our Miramar, Florida factory. Return to MicroSub+™ Subwoofer Systems.

Model

JL Audio MicroSub+ ACP108LG-W3v3
ACP108LG-W3v3

JL Audio MicroSub+ ACP208LG-W3v3
ACP208LG-W3v3

JL Audio MicroSub+ ACP110LG-TW1
ACP110LG-TW1

JL Audio MicroSub+ ACP112LG-TW1
ACP112LG-TW1

Driver(s)

8W3v3-0.40

(2) 8W3v3-0.40

10TW1-0.25

12TW1-0.25

Power Handling (RMS) / System Nominal Impedance

Built-in amplifier 250 W /
0.40 Ω

Built-in amplifier 500 W /
0.20 Ω

Built-in amplifier 400 W /
0.25 Ω

Built-in amplifier 400 W /
0.25 Ω

Input Voltage Range

70 mV - 1.40 V RMS (RCA),
280 mV - 5.4 V RMS
(High-Level)

70 mV - 1.40 V RMS (RCA),
280 mV - 5.4 V RMS
(High-Level)

70 mV - 1.40 V RMS (RCA),
280 mV - 5.4 V RMS
(High-Level)

70 mV - 1.40 V RMS (RCA),
280 mV - 5.4 V RMS
(High-Level)

Filter Mode, Slope,
Frequency Range

Low-Pass, 12 dB, 50 - 200 Hz

Low-Pass, 12 dB, 50 - 200 Hz

Low-Pass, 12 dB, 50 - 200 Hz

Low-Pass, 12 dB, 50 - 200 Hz

Output Polarity

0 or 180 degrees

0 or 180 degrees

0 or 180 degrees

0 or 180 degrees

Remote Control Option / Mode

Yes / Level

Yes / Level

Yes / Level

Yes / Level

PWR-GND
Wire /
Fuse Rating

8 AWG / 30 A

8 AWG / 30 A

8 AWG / 30 A

8 AWG / 30 A

Dimensions

18.5 in x 11.125 in x 5.0 in /
470 mm x 283 mm x 127 mm

21 in x 13.5 in x 6.625 in /
533 mm x 343 mm x 168 mm

21 in x 13.5 in x 6.625 in /
533 mm x 343 mm x 168 mm

23.75 in x 15.75 in x 9.25 in /
603 mm x 400 mm x 235 mm

Net Weight

20.1 lb / 9.12 kg

29.2 lb / 13.24 kg

25 lb / 11.34 kg

40.4 lb / 18.33 kg

Finish / Grille

Black Carpet / Yes

Black Carpet / Yes

Black Carpet / Yes

Black Carpet / Yes

MicroSub+™ Enclosures include the following JL Audio technologies and features:

DCD Technology Logo Flared Slot-Port V-Groove Construction USA Logo

DCD™ Amplifier Technology

Flared Slot-Port

V-Groove MDF Construction

Built in U.S.A. with Global Components

The most efficient subwoofer amplifier technology on the market delivers impressive power with minimal current draw and heat. DCD equipped amplifiers eliminate the need for conventional power supplies to generate astonishing output and low frequency extension, while achieving unprecedented power efficiency, up to 94%.

The flared slot-port design reduces turbulence at the port mouth so as to minimize any audible airflow effects common to ported enclosures.

This advanced cabinet-building technique uses CNC-machining to create precise panel joints that make enclosure assembly more efficient and exact. By using quality medium-density fiberboard and the efficient V-Groove assembly technique, an enclosure’s overall strength and seal is far superior than the typical butt-joint construction found on imported enclosures.

JL Audio's Miramar, Florida loudspeaker production facility is one of the most advanced in the world.


Return to MicroSub+™ Subwoofer Systems.