Miramar, FL – April 13, 2017 – JL Audio, an innovator in high-end audio solutions, launches a new series of coaxial and component speaker systems designed for installation into OEM (factory) speaker locations. The new C1 line of speakers cover all the key sizes with less models and is packed with features typically found at much higher price points.

Careful consideration was taken during the development of the C1 line of speakers to ensure fitment in a wide range of today's top selling models of cars, trucks, and SUVs. Frontal tweeter protrusion, mounting depth and mounting diameter were all analyzed for maximum installation flexibility. Additional adaptor rings (model specific) are included for bottom-mount applications and for compatibility with unique OEM speaker frame designs (GM, Honda, etc.) as well as oversized 6.75-inch openings. Combine the attention to fitment with features like aluminum dome tweeters, oversized voice coils and integrated lead wires; the result is unsurpassed value and performance.

"This year, we set out to solidify JL Audio as a full-range speaker company. The introduction of C1 anchors our offering in the category and provides the first time buyer a taste of amazing sound from the factory speaker location" said Manville Smith, VP of Marketing.

COAXIAL MODELS

C1-400x:
Continuous Power Handling: 35 Watts
Recommended Amplifier Power: 10-50 Watts per channel (RMS)
Efficiency: 84.5 dB @ 1W/1m | 90.5 dB @ 1W/0.5m
Sensitivity: 87.5 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 64 Hz - 24 kHz ± 3 dB

C1-525x:
Continuous Power Handling: 50 Watts
Recommended Amplifier Power: 10-75 Watts per channel (RMS)
Efficiency: 89.0 dB @ 1W/1m | 95.0 dB @ 1W/0.5m
Sensitivity: 92.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 54 Hz - 24 kHz ± 3 dB

C1-570x:
Continuous Power Handling: 50 Watts
Recommended Amplifier Power: 10-75 Watts per channel (RMS)
Efficiency: 90.5 dB @ 1W/1m | 96.5 dB @ 1W/0.5m
Sensitivity: 93.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 40 Hz - 24 kHz ± 3 dB

C1-650x:
Continuous Power Handling: 50 Watts
Recommended Amplifier Power: 10-75 Watts per channel (RMS)
Efficiency: 90.5 dB @ 1W/1m | 96.5 dB @ 1W/0.5m
Sensitivity: 93.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 48 Hz - 24 kHz ± 3 dB

C1-690x:
Continuous Power Handling: 60 Watts
Recommended Amplifier Power: 10-100 Watts per channel (RMS)
Efficiency: 91.5 dB @ 1W/1m | 97.5 dB @ 1W/0.5m
Sensitivity: 94.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 39 Hz - 22 kHz ± 3 dB

C1-690tx:
Continuous Power Handling: 60 Watts
Recommended Amplifier Power: 10-100 Watts per channel (RMS)
Efficiency: 90.5 dB @ 1W/1m | 96.5 dB @ 1W/0.5m
Sensitivity: 93.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 36 Hz - 24 kHz ± 3 dB

COMPONENT SPEAKER SYSTEM MODELS

C1-650:
Continuous Power Handling: 50 Watts
Recommended Amplifier Power: 10-75 Watts per channel (RMS)
Efficiency: 90.5 dB @ 1W/1m | 96.5 dB @ 1W/0.5m
Sensitivity: 93.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 48 Hz - 24 kHz ± 3 dB

C1-690:
Continuous Power Handling: 60 Watts
Recommended Amplifier Power: 10-100 Watts per channel (RMS)
Efficiency: 91.5 dB @ 1W/1m | 97.5 dB @ 1W/0.5m
Sensitivity: 94.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 39 Hz - 22 kHz ± 3 dB

C1-075ct:
Continuous Power Handling: 50 Watts
Recommended Amplifier Power: 20-50 Watts per channel (RMS)
Efficiency: 91 dB @ 1W/1m | 97 dB @ 1W/0.5m
Sensitivity: 92 dB @ 2.83V/1m
Nominal Impedance: 6 ohm
Frequency Response: 4 kHz - 24 kHz ± 3 dB

C1-100ct:
Continuous Power Handling: 60 Watts
Recommended Amplifier Power: 20-60 Watts per channel (RMS)
Efficiency: 91.5 dB @ 1W/1m | 97.5 dB @ 1W/0.5m
Sensitivity: 94.5 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 3.6 kHz - 22 kHz ± 3 dB

Woofer Features:

• Injection-molded mineral-filled, polypropylene cone
• Rubber, positive roll surround
• 1.0 in. (25 mm) diameter voice coil
• 1.2 in. (30 mm) diameter voice coil (C1-690x, C1-690tx, C1-690)
• Flat, linear roll spider with integrated lead wires (C1-400x)
• Flat, Conex® spider with integrated lead wires
• Ferrite magnet

Tweeter Features:

• Edge-driven, silk-suspended aluminum dome
• 0.75 in. (19 mm) diameter diaphragm/voice coil
• 1.00 in. (25 mm) diameter diaphragm/voice coil (C1-690x, C1-690tx, C1-690, C1-100ct)
• Ferrofluid cooling/damping
• Neodymium magnet

Super Tweeter (C1-690tx):

• Edge-driven, silk-suspended aluminum dome
• 0.75 in. (19 mm) diameter diaphragm/voice coil
• Ferrofluid cooling/damping
• Neodymium magnet

Crossover Features:

• Natural roll-off, low-pass
• 2nd order, high-pass filter with inductor and electrolytic capacitor
• Mixed order filter network (C1-690tx)
• In-line, outboard 2nd order, high-pass filter with Advanced Tweeter Protection Circuitry (C1-075ct, C-100ct, C1-650, C1-690)

MSRP USD: $49.99 - $159.99

Availability: April, 2017

Additional mobile product introductions for 2017 include ultra-premium C7 component drivers, additional amplifier models in the JX series, new Stealthbox^® subwoofer system models and additions to the ECS connection products.